Posts in CAST Projects
Seattle is about to roll out a brand new zoning designation, Residential Small Lot. Is it filling a gap, or creating one?
RSL Walk ups and cottage developments create a neighborhood within a neighborhood. 

RSL Walk ups and cottage developments create a neighborhood within a neighborhood. 

Seattle is facing a housing shortage, a climate crisis, and an increasingly inequitable city. Allowing more dwelling options, at various sizes and price points, is a great strategy to combat all three. Enter the Residential Small Lot Zone, Seattle’s attempt to add less expensive dwellings in dense, amenity rich urban centers without disrupting the historical fabric of single family detached houses. 

As part of Mandatory Housing Affordability (MHA), Seattle is rezoning many of the Urban Village parcels currently zoned ‘Single Family’ to ‘Residential Small Lot‘ (RSL). RSL exists under the code right now, but is applied to only 7 acres of zoned land in Seattle and has narrowly defined housing types and restrictions that have kept it from wider acceptance. Under MHA, RSL will be expanded to 768 acres and include about 6200 Single Family Lots. The proposed code has been rewritten from the ground up, so let’s dig in and see what it is likely to produce for Seattle’s neighborhoods. 

Function

Slide5.PNG

Reading the definition of RSL, it is hard not to feel sorry for this hard working zone.

It has to be a little of everything to everyone. It is uncommon for a zone description to get into issues of affordability, children, and the desires of its residents. We don't expect the description of General Industrial 2 (IG2) to make judgments about dockworkers’ life choices. Or Downtown Office Core-1 (DOC-1) to wonder about whether people in Downtown Office Core 2 (DOC-2 ) feel development there is appropriate.

Nevertheless, it exposes a question. What is the mission of RSL? Is it a transition between Residential zones? Is it meant to capitalize on the proximity to urban centers by putting residents close to amenities, jobs and transit? Is it fighting displacement, or fostering density? What need does it serve, and what is the positive vision of that zone? Right now, it is formulated with a little of everything, including some new stuff, and takes elements from single family, multi family, bridges residential and building code with a dash of high minded mission to address family housing and affordability.  It is a little like this: 

RSL.  Not elegant, but adapted to its environment.

RSL.  Not elegant, but adapted to its environment.

The Nitty Gritty: What does it look like on paper? 

Slide7.PNG
Slide8.PNG

What does RSL look like? 

Before RSL zone, this Single family zoned street has 28 dwellings. 

Before RSL zone, this Single family zoned street has 28 dwellings. 

And again, after a generation of development doubles the number of dwellings:

57 dwellings on the street, double the current density, but not much change at street level. 

57 dwellings on the street, double the current density, but not much change at street level. 

Prototypes for RSL Zoning

We've taken the liberty to suggest some prototypes, based on traditional 'missing middle' multifamily, optimized for this zoning.  

Bungalow Court (or the Walk Up Model) 

Slide17.PNG

For lots greater than 11,699 sq.ft, this bungalow court has (6) 3BR 1466 sq.ft. primary units, and (6) 733 sq.ft. 1 or 2BR ADUs.  This walk up is really a module that can be arranged into twos, threes, any grouping based on density limitations. 

Double Up Duplex

Slide15.PNG

Our idea is for a stacked duplex, 1500 sq.ft. configured for an ADU, optimized for the allowable FAR on a minimum 4000 sq.ft. lot. We'd target Passivhaus green building standard, integrate green roof, pv, and rainwater catchment.  

Alternative configurations for ADUs, or future co-housing options. 

Alternative configurations for ADUs, or future co-housing options. 

Recommendations for code tweaks!

Here are fourteen ways we can improve the Seattle’s MHA’s totally rewritten Residential Small Lot zone, BEFORE it goes into effect:

1.Exempt RSL from MHA fees. New dwellings created in the RSL zone will be subject to MHA, but will anyone built a rent restricted house? No. Therefore, fees due at permit issuance could be as high as $45,650. It will have a dampening effect on any homeowner looking to build a second house on the back of their lot. Many of those homeowners will build an ADU instead (not subject to MHA fee), eliminating the upside of more smaller homes in the marketplace. 

 

2. Allow ADUs to function as MHA performance! MHA performance is 50% for lots under 5699 sq. ft.. Meanwhile ADUs are by definition limited to a smaller size, and making them affordable would be closer in spirit to the original intent of the ordinance.

3. Eliminate new Maximum Net Unit Area limit. Maximum Net Unit Area is a new, unique limitation that only applies to this zone, and nowhere else. It is Floor Area per Unit, and it is often in conflict with the Floor Area Ratio (FAR) for the parcel. There are no MNUA exceptions for existing houses or additions, meaning many of Seattle’s classic bungalows in RSL zones will suddenly become non-conforming, unable to do a ‘bump out’ or even a SECOND story addition. Because basements count toward MNUA, but not FAR, expect a lot of new buildings with basements apartments. 

A basic RSL block reveals surprising inflexibility unless you want to add a second dwelling

A basic RSL block reveals surprising inflexibility unless you want to add a second dwelling

The owners could only do a 230 sq. ft. addition. Not a second story. They could however build a new dwelling behind it up to 2200 sq. ft.

The owners could only do a 230 sq. ft. addition. Not a second story. They could however build a new dwelling behind it up to 2200 sq. ft.

4. Start FAR at 1, give .25 bonus for more dwellings. The FAR is .75, lower than any Low Rise zone, and effectively lower than Single Family zoning (only governed by height and lot coverage). If RSL is meant as a transition between multifamily and single family, it is more restrictive that both.

5. Lower the density ratio to 1 to 1500. Fourteen percent of the newly minted RSL lots will not even support a second dwelling. Why go through this process then wipe the development capacity of 900 lots off the table? Rounding up for density at 1.85 * 2000SF means any lot under 3699SF is still a single family lot, but MNUA effectively limits all dwellings to an FAR as low as of .59.

Slide18.PNG

 

6. Allow more than one Accessory Dwelling Unit (ADU). All these lots are in urban centers, where we are planning to put almost all our growing population. Many lots or owners aren’t going to want to built a full second dwelling. Meanwhile, SFZ will soon allow two ADUs per primary residence. This flexibility will preserve many existing houses, and provide homes for new residents right in the urban villages.

7. Exclude ADUs from MNUA. An accessory dwelling unit counts against the MNUA, meaning many average houses wouldn’t be able to build a cottage without sacrificing square footage in the primary house.

8. Resist the urge to Design Standard. The two Design Standards for RSL are ridiculous. Different color walkways to the house in back? Why? We don’t expect such ham fisted wayfinding in multifamily zones where there’s likely more front doors. One of the great strengths of the proposed code is that it did away with the many of the restrictive types, like ‘tandem housing.’ Let’s not dilute it with well meaning micro management, only to find out that we’ve created a less than graceful solution (remember the platypus!).

9. Allow exceptions from MHA when preserving existing houses. Subdividing existing houses into multiple units will be penalized by the Design Standards, and be subject MHA fee, at the full price for the area of units. The MHA fee calculation is gloss floor area/total units X net increase of units. A 3000 sq ft house, converted into a triplex from single family, would pay MHA on 2000 sq ft as if new, or up to $41,000. That neither incentivizes preservation or the creation of more affordable housing. 

This is a triplex.  Converting it under the MHA regime would cost tens of thousands of dollars in MHA fees in addition to the requirements of retrofitting.

This is a triplex.  Converting it under the MHA regime would cost tens of thousands of dollars in MHA fees in addition to the requirements of retrofitting.

 

10.Take out limit on number of apartments. The stigma of apartment living results in one of the most efficient (and revered) forms being outlawed. The code is clear: RSL outright outlaws more than three apartments regardless of lot size. No cute Capitol Hill fourplexes.

This fourplex is not allowed under the new RSL zone. 

This fourplex is not allowed under the new RSL zone. 

11. Eliminate owner occupancy requirements. We don’t require owners to live on site in other multifamily zones, owner occupancy requirements will severely limit the number of accessory dwelling units and they reinforce a fundamentally class based stigma against renters.

12. Change all residential zones to ‘Residential’. We now have three titles for zones where residences are the only use; Single Family, Lowrise, Residential Small Lot. While RSL is being treated as a unique bridge between SFZ and LRZ, it should be part of a continuum of dwelling per square foot. Streamline!

13. Amend Seattle Residential Code to cover up to four apartments. Building codes switch to the more demanding SBC for anything more dense than a duplex and ADUs are considered as such. When buildings should be getting more efficient, like stacking a third apartment on top of a double decker, there is a quantum leap in construction cost, driven by code compliance.

14. Allow Live Work and Corner stores. In midrise zones, having residential suites at the street level seems forced. Two blocks from the center of an urban village, having an office space legible from the street makes total sense. Allowing corner stores would expand the walkshed so more people will walk to pick something up, rather than drive to a supermarket.

Neighborhood institutions start with entrepreneurial neighbors. Give them a place.

Neighborhood institutions start with entrepreneurial neighbors. Give them a place.

Historic Seattle - 2017 Outstanding Modern Preservation Award

Congratulations to the whole Team and a huge thanks to Historic Seattle for the the recognition of the Robert Reichert House and Studio with the 2017 Outstanding Modern Preservation award last night!

 

Project team:

Clients : Reichert Studio
Heidi and Darin

Contractor: Dboone Construction
Dave Boone Project manager, Luke Marcum Site super

Architect : CAST architecture
Stefan Hampden, principal  & Brian Campbell, associate.

Structural Engineer: TSE Engineering
Keith Ryan PE

Envelope Engineer: RDH building Science inc
Dan Rundle

 

 

Historic Seattle - 2017 Outstanding Modern Preservation Award

Historic Seattle - 2017 Outstanding Modern Preservation Award

historic seattle awards 2017 - team.jpg

Abridged project team at the awards left to right : Luke, Dave, Stefan, Darin, Heidi and Jeffrey 

Historic Seattle Dinner and awards ceremony at Washington Hall.

Historic Seattle Dinner and awards ceremony at Washington Hall.

New stucco facade of the Reichert House & Studio complete with shadow paintings

New stucco facade of the Reichert House & Studio complete with shadow paintings

Interior stairs with view of "door to heaven"

Interior stairs with view of "door to heaven"

Retooled entry of completed project

Retooled entry of completed project

Rainier Beach Urban Farm classroom is taking shape!

There is a certain ethereal, minimal quality to a room without walls, without columns, without visible support. 

At Rainier Beach, our classroom building has a 24' x 24' covered outdoor space, with a translucent roof components, cantilevering off the building. Last week, they put up the trusses and now the skeleton of the space is taking shape, and I'm pretty excited.  The Big Cantilever can be absolutely magic on a visceral level, where the structure's logic defies gravity.  

Now can you be begin to perceive the core of the design: heavy elements buttressed into a hillside, between two groves of trees, with a translucent wedge floating over a simple gathering space, out of the rain, with the farmland stretching out, uninterrupted.  

New cottage designs on the boards

Do you want a glass wall but don't want to feel exposed in your cottage? In this design, we've placed a rusted custom cut steel screen wall just in front of the cottage, which will eventually be overgrown by flowering vines, creating privacy for both cottage and house, soft dappled light in the main floor, and a custom element that gives the cottage a distinctive feel which is both natural and a little bit industrial.   

This second design takes advantage of a steep corner site to make a sunlit treehouse with a iconic form and stripped down modern details.  The end of the gable house peers out at a mature maple and the Olympics in the background.  The cottage has an inverted plan with vaulted living spaces up, and sleeping downstairs.  

The third one sits delicately between some large heritage trees (made much more difficult by the city's somewhat inchoate Tree preservation plan requirements).  The big porch is a natural extension of the public spaces of the house, with the private spaces screening views to the primary residence.  


Ballard Farmhouse

The Lichtenstein - John residence is nearing completion... This project was a complete renovation and addition to a classic farmhouse in Ballard. Care was taken to preserve the character of the home while adding much needed space, updating the layout to provide better flow and connecting spaces for a more contemporary lifestyle.

A glimpse of the covered veranda off of the kitchen and dining room is visible from the south facing street front. 

A glimpse of the covered veranda off of the kitchen and dining room is visible from the south facing street front. 

The front entryway is ready for tile

The front entryway is ready for tile

A new bathroom on the main floor finds a snug but workable home in what used to be a hallway.

A new bathroom on the main floor finds a snug but workable home in what used to be a hallway.

The renovated entryway opens up the original front porch that had been walled in.

The renovated entryway opens up the original front porch that had been walled in.

A new bathroom on the second story features a skylight and deep soaking tub.

A new bathroom on the second story features a skylight and deep soaking tub.

The renovation opened up the living room to connect it to the dining room and kitchen addition.

The renovation opened up the living room to connect it to the dining room and kitchen addition.


Why aren't we seeing more Backyard Cottages?

In a city where the land use policy discussions are centered around density, the lack of new housing units, affordability even rent control and sustainability, why aren't Backyard Cottages more popular and more prevalent?  

On Thursday, I'll be on a panel discussing the state of Seattle's Backyard Cottages with City Council from 12-1 pm.   The premise of the 'Lunch and Learn' is one, to assess the status of current planning efforts and two, look at some alternative strategies from Portland.  

--Matt

 


CAST named Best Of Houzz 2015--Third year running

For the third year running, CAST architecture was named as one of the best architects on Houzz.com.  Now that the website has a database of more than 3 million photographs representing thousands of firms, it is more of an achievement than ever before.  Thanks to all our great clients for continuing to bring fresh challenges!  We're looking forward to a great 2015! 

Roslyn Cabin Nearing Completion!

Spring seems to have arrived early to the Northwest this year. The lack of snow and sunny skies have been a boon for builder Dave Arnold and his crew at Mt. Si Construction. They are currently taking advantage of the sunshine as they finish up the exterior envelope. The interiors are closing in as well, cabinets are in, trim is up and tile is on the way.

Here are a few shots of the progress:

View of the Southwest corner of the home

View of the Southwest corner of the home

View of the greatroom from the kitchen

View of the greatroom from the kitchen

The kitchen is located at the west end of the greatroom

The kitchen is located at the west end of the greatroom

A covered outdoor room off the master suite and east end of the greatroom 

A covered outdoor room off the master suite and east end of the greatroom 

View of the south elevation

View of the south elevation


Considerations When Choosing Switches and Outlets

We recently had a client deliberating what to choose for their electrical switch and outlet trim. They had an aversion to contemporary paddle style light switches feeling that the look was stuck in the '80s. We put together these thoughts and sketches to help them understand the choices available and some of the logic behind layout choices when multiple switches pile up in one location.

Which Style? When considering switch styles (contemporary -vs- classic) it is helpful to think of the choice as less of a style and appearance selection and more of a functional choice.

Contemporary - Architects and designers like contemporary style switch plates (Decora and similar) not because we love the look, but because they allow the highest level of design flexibility and the largest selection for trim styles and functions - there are literally thousands of switch, trim, function and layout options available.

Classic - Classic style switches and outlets require use-specific switch plate covers and are more limiting when it comes to switch, trim, function and layout options. As a consequence they are less common in new construction. We typically only use classic style switches and outlets in remodels and renovations when we want to blend in with existing conditions.

SWITCH-STYLE
SWITCH-STYLE

Switch and outlet groupings: Typically, when I have a situation where more than 3 functions or switches pile up in one area, I try to break the functions into sensible groupings and locations. I also tend to want to make them as compact as possible.

For example, let's say that we have a Master bath vanity area with multiple switches and an outlet. We have 4 controls for a Fan/Light/Heat/Night-light combo unit, an outlet, and a switch for a light fixture over the tub. If we were to gang them all up in one box the cover plate would become quite large and what switch goes to which function would be less clear.

If we divide up the functions into separate boxes and use switch size and groupings to create a hierarchy of controls we give the user a better shot at guessing (and remembering) which switch does what.

Here's a sketch of a few layouts to provide an example:

SWITCH-GROUPINGS