Posts in News
The Urbanist - STATE MODEL CODE FOR MIDDLE HOUSING IS MISSING ENOUGH HOUSING

STATE MODEL CODE FOR MIDDLE HOUSING IS MISSING ENOUGH HOUSING

BY MATT HUTCHINS (GUEST CONTRIBUTOR)

See full article and graphics here: https://www.theurbanist.org/2023/07/10/state-model-code-for-middle-housing-is-missing-enough-housing/

Commerce recently had a consultant create a form-based code, but the draft fails to advance housing abundance.

Now that Washington State’s Middle Housing bill (HB1110) has been signed into law, the next question is what implementation will look like — what kind of housing and where. The Department of Commerce has published a request for consultants to draft a model code that 1) will help jurisdictions write their own compliant middle housing code or 2) will supersede local zoning if they fail to implement their own in advance of the deadline (six months after their comprehensive planning update).

While we don’t know what cities and towns are thinking, we do have a picture of how Commerce is approaching the middle housing code. Last fall, Commerce hired a consultant to “inform about and assist local governments with middle housing policies, regulations, and programs.” 

In May, a focus group of planners, developers, and architects previewed a draft ‘Toolkit’ that illustrates four strategies that local governments could overlay on their residential zoning to allow new denser housing types within existing detached single family neighborhoods. The foundation of this toolkit is a form-based code meant to create ‘objective’ standards for middle housing that can be applied widely.

The issue is that the toolkit, rather than solving for affordability, feasibility, and the lowest carbon footprint, is primarily focused on crafting development guidelines that will keep new infill development the size of average houses and thus minimize the outcry from vocal neighbors. While this might be an easier to swallow approach for Washington cities and towns, it doesn’t scale up to address the deeper issues that HB 1110 was passed to address: the massive shortfall of new places for people to live. 

While Commerce’s original intent was to come up with instructive materials broadly applicable to most local governments, the effort lags behind what more progressive jurisdictions are already doing. But when we dig into the details, the toolkit suggests real reductions in development capacity: smaller footprints, bigger setbacks, and lower roof heights than are currently allowed in many Puget Sound cities. At its very worst, it will give slow-growth municipalities the option to select a new zoning overlay that is more prescriptive and restrictive, thus spoiling any chance that any new middle housing will be built.

Let’s go through the proposed new toolkit and look at some of the underlying flaws. 

  • They state, “This toolkit does not provide standards for buildings taller than three stories.” For three of the four overlays in the Toolkit, buildings are conceived as two and a half stories with a height bonus for hip and gable roofs –  less that most of Washington cities’ least dense residential zones today. Rather than proposing an actual incremental increase, it ignores the status quo as a starting point. If you want a single pitch ‘shed’ roof, the 22-foot height limit is actually less than what we allow for a backyard cottage in Seattle today.

  • Parking is mandated throughout the toolkit, a reversal for many jurisdictions that are moving away from required off street parking. Indeed one of the strengths of HB 1110 is releasing parking restrictions for new housing.

  • Most overlay zones top out at four units per parcel, equivalent to Seattle’s second least dense zone, Residential Small Lot. Much of the ‘middle’ housing that is missing is between a house-sized triplex and the ‘5 over 1’ medium-sized apartment building. While this toolkit focuses on redundant standards for housing types we already allow, like townhouses and triplexes, it is silent on helping planners visualize appropriately-scaled urban buildings that might have between six to twenty units.

  • Townhomes today, for better or worse, are the least expensive middle housing alternative available in the market, and the toolkit hamstrings their development with provisions that limit the number per building and the building length. The most successful rowhouse style homes on corner lots wouldn’t comply.

  • The toolkit increases barriers for sites with multiple buildings on a single site, which would render many currently popular types of middle housing, such as detached townhouses, cottage clusters in Residential Small Lot zoning, and arguably even detached accessory dwelling units nearly impossible to build on compact urban lots.  

  • The toolkit does not provide flexibility for sites that might want to preserve existing housing and build more. It assumes parcels are cleared rather than provide provisions for new buildings in the backyard, lot splitting, or additions that add units.

  • While much of today’s urban design discourse is centered around neighborhoods where goods and services are accessible within a 15-minute walk or roll, the toolkit doesn’t have any provisions for mixed uses like daycares, commercial suites or corner stores.

  • Finally, as one gets into the details of each overlay, it is chock full of reductions: larger setbacks, less lot coverage, less height, larger minimum lot areas, prescriptive design standards – each taking a bite out of the viability of future housing. When we compared a fourplex we’re currently designing in Spokane against the toolkit, we’d need to reduce the footprint by 32%, lose the front and back porches, and downgrade the 2-bedroom units to 1-bedrooms.  

  • Unlocking the residential potential of urban land is critical if we’re going to provide the more than 1.1 million homes Washington State projects we’ll need over the next 20 years, and that means reintroducing multi-family housing types that exclusionary zoning has regulated out of existence.

    With this upcoming model code, we can take a good hard look at how new infill development is built, but we first have to move past the idea that middle housing is house-sized buildings carved into more apartments, or cottage clusters. Overall, the toolkit’s conceptual limitations and prescriptive ‘objective standards’ don’t reflect the real conditions of Washington neighborhoods.  

    A more serious effort would worry less about what neighbors might think and center our goals of housing abundance and climate action leading with middle housing types that work all the way up to four- and five-story mid-sized buildings in keeping with the best practices of urban planning around the world. Washington needs a flexible model code that supports the big picture goals of abundant housing.

Mazama Public House Featured in Methow Homes magazine

A “People Place” by Design
The Mazama Public House was conceived with community in mind.

“The long communal tables were always indicative of the way we were thinking about the place. You come in and you’re part of the community. You share a table and suddenly you’re in conversation with a person you’ve never met before. It’s a fun opportunity.”
-- Stefan Hampden, CAST architecture

See the full article here on Issue.

This pub is the new gathering spot for the community of Mazama, at the north end of Washington’s Methow Valley.  The 1,868 square foot public house is designed to seat 56 and another 50 outside with built-in benches on the four-season covered patio. In warm weather, a garage door system opens for a seamless connection to the outdoor decks. The height of the shed roof and the expansive windows on two sides are sited to take advantage of natural light and views toward Goat Peak. The interior features wood beams punctuated by blackened steel and concrete floors. Custom tables and bar slabs were crafted from locally sourced Douglas-fir. Outside, blackened steel will accent the wood structure. The siding is a dark-stained, rough-sawn vertical channel shiplap.

Green design features the use of highly durable siding materials including a mix of locally harvested wood from the Methow Valley and Boise Cascade products. The generous overhangs were designed to protect the siding from wear and tear. Full LED lighting was installed.

📸@benjdrummond
📸@mitchellimage

@mazamapub
Architect: CAST architecture
Owner: Grumpy Goats, LLC
Operator: Old Schoolhouse Brewery @oldschoolhousebrewery
Contractor: Bjornsen Construction, Tom Bjornsen                                    
Structural: Harriott Valentine Engineers @harriottvalentine
Lighting: LightWire @ltwire
Windows & doors: @sierrapacificwindows  

CITIES’ BIGGER FUTURE CAN LOOK AND FEEL BEAUTIFUL—IF WE BUILD FOR IT An architect invites cities and towns to zone and design for the futures they want.

Reposted by permission of Sightline Institute

Author: Matt Hutchins (@HutchinsMatt)

rendering, missing middle, seattle, rendering, policy work, planning

A Seattle street showing the inclusion of more middle housing. Rendering by Matt Hutchins, used with permission.

matt hutchins, AIA, PHCD, INVITES CITIES AND TOWNS TO ZONE AND DESIGN FOR THE FUTURES THEY WANT

TAKEAWAYS

  • Seattle has concentrated several decades of population growth within narrow corridors of the city, disproportionately affecting poor and BIPOC communities while failing to ask nearby detached-house areas to evolve and grow as well.

  • Cities and towns with rising housing costs can address home shortages and inequities by opening up their zoning to new design options, as proposed by a middle housing bill that Washington state leaders are currently considering.

  • One such design: the Seattle Six, an attractive, economical, adaptable design that enhances neighborhood vibrancy and prioritizes quality of life, environmental responsibility, and anti-displacement. Cities and towns elsewhere can imitate or design their own such solutions.

If you want a healthy garden, you don’t blast just a couple plants with the hose; you water everything slowly so the roots can soak it up. Same with a city or town: sprinkle some housing everywhere, and you’ll get healthier neighborhoods.

Under Seattle’s Urban Village Growth Strategy the city has funneled 25 years of growth into tightly designated areas without asking adjacent detached-house areas to evolve as well. Along with America’s decades of racist redlining, car-centric design, and the primacy of detached-house building, this kind of strategy has limited what our cities can be. It has sent home prices skyrocketing, deepened racial inequities, and failed to address climate change in how we build our communities. Certain “gentle density” solutions like backyard cottages and townhomes have expanded housing options in tight markets, but for metro areas, the need is greater than these alone can address.

Fortunately, Washington legislators are currently considering a powerful “missing middle” housing bill that would open up a host of modest-sized housing options for people across the state while delivering numerous other benefits for communities. They are reworking zoning rules to empower us to build the future we want. And they are making it possible for architects like me to creatively contribute to the suite of design solutions that can help address the multiple challenges our cities and towns face.

INTRODUCING THE “SEATTLE SIX”

As an architect, I see how zoning regulations, good and bad, directly shape the design of buildings. Right now, there is a once in a generation opportunity to conceptualize the next basic building blocks of our towns and cities, starting from a set of key guiding values:

  • Healthier neighborhoods focused on quality of life

  • Adaptable site design and flexible home configurations

  • Deep green construction and inhabitation over a building’s life cycle

  • Centering anti-displacement

  • New possibilities for ownership, subsidized rentals, and more affordable housing

And while this design was developed specifically for Seattle’s typical lots and market, the values driving it are ones many Washington communities share. This is an invitation—and opportunity—for Washingtonians everywhere to imagine what could be possible in their own neighborhoods.

The “Seattle Six” is a three-story apartment building with six to ten households that fits on a range of typical residential lots. It has a compact form that is optimal for deep green building and observes the same height limits as Seattle’s Neighborhood Residential, Residential Small Lot, and Low-Rise 1 zones. In transit-rich areas, it can accommodate additional stories and units. With a floor area ratio (FAR) between 1.5 and 2.0, the Six is still small enough to bypass thresholds that trigger Seattle’s onerous Design Review. And finally, it proposes a clear direction for the urban design of streets and blocks that works in the short, medium, and long terms, aesthetically and economically.

HEALTHIER NEIGHBORHOODS FOCUSED ON QUALITY OF LIFE

The Seattle Six delivers a range of benefits for neighborhood vibrancy, connection, and attractiveness for residents both in and near Sixes. First, it energizes the sidewalk without overwhelming the street. By reducing the front setback to 12 feet but allowing stoops, covered porches, and balconies in an 8-foot-deep buffer, more residents have access to open space and a connection to life on the street. It replaces the idea of forced façade modulation with the option to embellish and individualize the building, while providing an amenity without complicating the basic structure. Overall, it is similar in height to currently allowed designs and recalls the classic small apartment buildings constructed in the decades before zoning strictures banned them from much of the city.

At the block level, over time, the Six establishes a land use pattern with well-defined urban edges and an interior courtyard in the backyards protected from noise, pollution, and street intrusions. It better preserves existing trees and makes room for new ones, a big advantage over typical oneplexes and townhomes, for instance, which slice up open space into narrow throughways or make backyards the only available land for new housing.

rendering, missing middle, seattle, density, rendering, policy work, planning

The Seattle Six, a modest-sized apartment building designed specifically for lower-density neighborhoods. Rendering by Matt Hutchins, used with permission.

Speaking of backyards, the Six prioritizes access to larger rear yard open space, ample daylight, and options for big terraces for each flat. Units face both the street and the backyard, where kids can play or gardens can flourish, an improvement over another building across a narrow side yard. Residents cycling in will appreciate the design’s easy bike access, accommodating lockable individual bike storage at the ground floor and again in each unit.

Seattle Six, rendering, missing middle, seattle, density, rendering, policy work, planning

Comparison between current and potential zoning envelopes for urban infill development. Illustration by Matt Hutchins, used with permission.

What’s more, on an everyday quality-of-life basis for people living in or near a Seattle Six, the benefits multiply. Because denser housing types bring in new families, one block with ten Seattle Sixes would have enough families with kids under five to justify a small daycare. Five more similar blocks would have enough customers for a successful café. Ten more, and you have a walkable/rollable neighborhood with local jobs, rapid transit, retail, services, and restaurants. At corners, the ground floor units could be live/work, corner stores, daycares, or cafes. Because it fits well with detached house neighborhoods, the Seattle Six can locate away from busy arterial streets and near to places like parks, schools, and libraries, bringing more vitality to every block.

Seattle Six, rendering, missing middle, seattle, density, rendering, policy work, planning

How a block can grow. Top left: typical block of detached houses. Top right: typical townhouse development that would result in tree loss and inefficient use of open space. Bottom left: Ten Seattle Sixes sprinkled through the block. Bottom right: a full block of Seattle Sixes, showing how exchanging narrow side setbacks for larger back yards creates far more useable open space and more room for big trees. Illustrations by Matt Hutchins, used with permission.

In most cases, building a Seattle Six would require demolition of an older structure, just as a big new oneplex does today. This is exactly why Seattle should also allow alternative infill options like backyard ADUs and small-plexes that can coexist with older structures that remain in fine shape.

ADAPTABLE SITE DESIGN AND HOME CONFIGURATIONS

The Seattle Six supports a range of household sizes, multi-generational living, and moving within the building as life situations change. One can downsize and “age in place” or upsize as their family grows without having to give up the community of neighbors they’ve gotten to know.

Seattle Six, rendering, missing middle, seattle, density, rendering, policy work, planning

Ground floor and typical upper floor plan showing flexible range of unit types (click on images to enlarge). Illustrations by Matt Hutchins, used with permission.

Even on lots smaller than the 50’x100’ Seattle standard, the design is flexible enough to offer a variety of unit sizes. Floors can be a mix of family-sized one- and two-bedrooms; they can combine into one large multigenerational floor and later split into a principal flat and mother-in-law; or they can comprise a sprinkling of studios. A single central stair optimizes each floor for living space rather than the dark double-loaded corridors typical of larger apartment buildings. The version shown below is built on a concrete slab at grade level, but a partly below-grade floor of garden units would be practical depending on the topography.

Seattle Six, rendering, missing middle, seattle, density, rendering, policy work, planning

The Seattle Six fits into existing neighborhoods and connects more people to life on the street. Illustration by Matt Hutchins, used with permission.

The ground floor features accessible units via ramp, as well as a flexible studio. Residents can use it for a variety of purposes: for residents with temporary disabilities, housing a caretaker, or a short-term guest suite. Alternatively, it could be a common room, hosting things like teen game nights or get-togethers in a co-housing community.

DEEP GREEN CONSTRUCTION AND INHABITATION OVER A BUILDING’S LIFE CYCLE 

Buildings are a major source of climate emissions, but they don’t have to be. They can incorporate deep green construction that reduces a building’s embodied and operational carbon.

To this end, the Seattle Six is conceived using Passive House principles in its design. The Six’s simple, compact form, continuous insulation to keep interiors comfortable at a consistent temperature, and shared party walls reduce energy loss, paying back residents with a lifetime of low heating and cooling demand. Paired with rooftop photovoltaic panels, the Seattle Six can be net zero energy.

green design, net-zero, missing middle drawing

Diagram of the Seattle Six’s green building features: Passive House, Net Zero, and Dowel Laminated Mass Timber. Illustration by Matt Hutchins, used with permission.

As for materials, the Six’s structure is designed with a dowel-laminated timber structure, which sequesters carbon and minimizes the need for concrete or steel, resulting in a low embodied carbon construction. The mass timber party walls and stair core satisfy the fire resistance rating. And bonus: it can be remanufactured for use in a future project as part of a more circular economy.

The Six also accounts for its region’s natural environment. Its green roof and on-site storm water management limits runoff from the site. And as wildfire smoke becomes more commonplace, the Six’s heating recovery ventilation system not only saves energy but filters pollutants to supply fresh air throughout the building.

COUNTERING DISPLACEMENT

The goal of Seattle’s Urban Village growth strategy was to concentrate new housing around commercial centers and serve them with an expanded transit network. But the strategy’s zoning changes disproportionately landed on poor or BIPOC neighborhoods, such as the Rainier Valley. The consequence has often been a cycle of speculation, displacement, and gentrification at the expense of people who’ve built their lives there.

Having a small apartment building that can plug in anywhere, starting in areas the city characterizes as having “low displacement risk” (i.e., most residents have the means to stay in their homes or find other housing nearby), would reduce the pressure on housing in other, less expensive areas. In a city like Seattle that’s adding lots of jobs, building lots of homes is essential—and the Six is a template for every neighborhood to do its part.

Allowing six or more households to divvy up the cost of Seattle’s pricey land lowers housing costs, too. Efficient, modern buildings like the Six would offer a mid-sized and mid-priced option between detached houses or townhouses on the one hand and large apartment buildings on the other. Indeed, Sightline recently analyzed possible development scenarios under Portland’s new zoning code. It found that new triplexes and fourplexes weren’t quite financially viable there in most cases, but that sixplexes in Seattle’s more expensive market might be.

In other words, the Seattle Six fights displacement in exactly the same way it fights segregation: it creates a new, cheaper way for people to live near jobs, parks, schools, and good public transit while reducing development pressure on other vulnerable neighborhoods.

NEW POSSIBILITIES FOR OWNERSHIP, SUBSIDIZED RENTALS, AND MORE AFFORDABLE HOUSING

We’ve underproduced housing for nearly a generation, putting even the most modest starter home beyond the reach of most Washingtonians. In just a decade, the state’s median home price has increased by 237%. Rents are on a similar trajectory, rising 183% for a two-bedroom apartment over the same period.

Whatever form new development takes, we’ll also need creative forms of ownership: co-ops, urban co-housing, and condos, for example. One interesting idea well suited for Seattle is the Polykatoikia, where landowners who are cash-poor but land-rich negotiate with a developer to swap a new apartment building on their land in exchange for a flat or flats in that new building. It is an excellent way for local landowners to maintain and grow generational wealth, stay in their neighborhoods, and create new homes in the process.

missing middle housing drawing, Seattle Six

The “polykatoikia” idea, or housing swap, by which a homeowner can support new housing, maintain ownership, and resist gentrification. Illustration by Matt Hutchins, used with permission.

To the south, Portland’s Residential Infill Project allows developers to build extra units in exchange for affordable housing. The Seattle Six framework could easily support more households, too: either with an extra floor or a smaller height limit bonus to add a level of garden suites. Seattle’s Mandatory Housing Affordability performance option won’t help private developers create on-site affordable units given the small scale, but perhaps some of the MHA payments taken in by the Office of Housing could be deployed to finance small apartments, similar to how the Equitable Development Initiative has been supporting anti-displacement efforts.

BUILDING THE TOMORROW WE WANT, TODAY

It is a watershed moment for Washington: an opportunity in our housing policy to address climate change and racial inequities while building the homes we need and communities we want. The Seattle Six is just one model of how that might look. It’s also an invitation, as state leaders consider critical middle housing legislation, for communities across the state to boldly envision the future they want and build it into reality.

Matt Hutchins is a principal at CAST architecture, specializing in creative urban infill, affordable housing, green building, and shaping land use policy. He serves on the Seattle Planning Commission and as the Director of Public Policy for AIA Seattle. He is a Certified Passive House Designer. Find him on Twitter at @HutchinsMatt.

Reichert House & Studio renovation Featured in DWELL!
Dwell magazine, reichert house restoration, mid-century modern renovation

Reichert house restoration, Seattle

“There are moments where I look around and feel like I’m living inside a work of art,” says homeowner Darin.

Through this down-to-the-studs renovation, CAST pays homage to modernist architect Robert Reichert’s former Seattle home. See more at Reichert House & Studio.

@dwellmagazine
Photography: @andrew.giammarco
Words: Lauren Gallow @desert.ren
Constructed by: @dboone0911
Structural Engineer: @swensonsayfaget
Landscape Design: Maggie Payne
Lighting Design: Luminous NW Entry tile: @pophamdesign
Entry metal work: @seattlemetalproducts

March 20th Seminar: Seattle's Residential Small Lot zoning for real estate, building and design professionals
6 Courtyard townhouses on a 12,000 sf ft lot

6 Courtyard townhouses on a 12,000 sf ft lot

Seattle is going to change thousands of residential lots from ‘Single Family’ to ‘Residential Small Lot’ (RSL) as part of the MHA zoning reform. The rules covering RSL have been totally rewritten and there are many questions about how it will affect our neighborhoods such as Crown Hill, West Seattle, and South Park

What is RSL?

Where is RSL?

What are the rules governing the density, size, etc?

How is MHA going to factor into development?

What is the difference between a backyard cottage and a second house?

What are some of the prototypical developments that are possible under the new code?

If you live in one of the affected urban village or are interested in innovative infill housing, join Matt Hutchins, AIA for this informational talk.

RSVP here:

https://cast_whatisrsl_march20.eventbrite.com

Envisioning Seattle's Residential Small Lot Zoning Future: Jan 30th, 6-7:30pm, Columbia Branch Library
Duplex View 2 Curved Rendering.jpg

Seattle is going to change thousands of residential lots from ‘Single Family’ to ‘Residential Small Lot’ (RSL) as part of the MHA zoning reform. The rules covering RSL have been totally rewritten and there are many questions about how it will affect our neighborhoods such as Columbia City and Rainier Beach.

First, what is RSL and what kinds of new development are we likely to see?

Second, how does RSL address displacement, affordability, density or sustainability?

Finally, how can we improve RSL so that it can be the most effective before the ordinance comes before Council?

If you live in an urban village or are interested in innovative infill housing, join Matt Hutchins, AIA for this informational talk.

RSVP here:

https://www.eventbrite.com/e/envisioning-seattles-residential-small-lot-future-tickets-52921293012

Methow Housing Trust's Canyon Street addresses the need for Affordable housing in Twisp WA
methow housing trust affordable canyon street

We are very excited to be involved in a fantastic affordable housing project in collaboration with the Methow Housing Trust.  We are going to to be rolling out two and three bedroom houses along Canyon Street in Twisp, perfect for workforce housing or elderly residents--two demographics that are often the first to lose out when demand for housing is running up prices.  

Seattle is about to roll out a brand new zoning designation, Residential Small Lot. Is it filling a gap, or creating one?
RSL Walk ups and cottage developments create a neighborhood within a neighborhood. 

RSL Walk ups and cottage developments create a neighborhood within a neighborhood. 

Seattle is facing a housing shortage, a climate crisis, and an increasingly inequitable city. Allowing more dwelling options, at various sizes and price points, is a great strategy to combat all three. Enter the Residential Small Lot Zone, Seattle’s attempt to add less expensive dwellings in dense, amenity rich urban centers without disrupting the historical fabric of single family detached houses. 

As part of Mandatory Housing Affordability (MHA), Seattle is rezoning many of the Urban Village parcels currently zoned ‘Single Family’ to ‘Residential Small Lot‘ (RSL). RSL exists under the code right now, but is applied to only 7 acres of zoned land in Seattle and has narrowly defined housing types and restrictions that have kept it from wider acceptance. Under MHA, RSL will be expanded to 768 acres and include about 6200 Single Family Lots. The proposed code has been rewritten from the ground up, so let’s dig in and see what it is likely to produce for Seattle’s neighborhoods. 

Function

Slide5.PNG

Reading the definition of RSL, it is hard not to feel sorry for this hard working zone.

It has to be a little of everything to everyone. It is uncommon for a zone description to get into issues of affordability, children, and the desires of its residents. We don't expect the description of General Industrial 2 (IG2) to make judgments about dockworkers’ life choices. Or Downtown Office Core-1 (DOC-1) to wonder about whether people in Downtown Office Core 2 (DOC-2 ) feel development there is appropriate.

Nevertheless, it exposes a question. What is the mission of RSL? Is it a transition between Residential zones? Is it meant to capitalize on the proximity to urban centers by putting residents close to amenities, jobs and transit? Is it fighting displacement, or fostering density? What need does it serve, and what is the positive vision of that zone? Right now, it is formulated with a little of everything, including some new stuff, and takes elements from single family, multi family, bridges residential and building code with a dash of high minded mission to address family housing and affordability.  It is a little like this: 

RSL.  Not elegant, but adapted to its environment.

RSL.  Not elegant, but adapted to its environment.

The Nitty Gritty: What does it look like on paper? 

Slide7.PNG
Slide8.PNG

What does RSL look like? 

Before RSL zone, this Single family zoned street has 28 dwellings. 

Before RSL zone, this Single family zoned street has 28 dwellings. 

And again, after a generation of development doubles the number of dwellings:

57 dwellings on the street, double the current density, but not much change at street level. 

57 dwellings on the street, double the current density, but not much change at street level. 

Prototypes for RSL Zoning

We've taken the liberty to suggest some prototypes, based on traditional 'missing middle' multifamily, optimized for this zoning.  

Bungalow Court (or the Walk Up Model) 

Slide17.PNG

For lots greater than 11,699 sq.ft, this bungalow court has (6) 3BR 1466 sq.ft. primary units, and (6) 733 sq.ft. 1 or 2BR ADUs.  This walk up is really a module that can be arranged into twos, threes, any grouping based on density limitations. 

Double Up Duplex

Slide15.PNG

Our idea is for a stacked duplex, 1500 sq.ft. configured for an ADU, optimized for the allowable FAR on a minimum 4000 sq.ft. lot. We'd target Passivhaus green building standard, integrate green roof, pv, and rainwater catchment.  

Alternative configurations for ADUs, or future co-housing options. 

Alternative configurations for ADUs, or future co-housing options. 

Recommendations for code tweaks!

Here are fourteen ways we can improve the Seattle’s MHA’s totally rewritten Residential Small Lot zone, BEFORE it goes into effect:

1.Exempt RSL from MHA fees. New dwellings created in the RSL zone will be subject to MHA, but will anyone built a rent restricted house? No. Therefore, fees due at permit issuance could be as high as $45,650. It will have a dampening effect on any homeowner looking to build a second house on the back of their lot. Many of those homeowners will build an ADU instead (not subject to MHA fee), eliminating the upside of more smaller homes in the marketplace. 

 

2. Allow ADUs to function as MHA performance! MHA performance is 50% for lots under 5699 sq. ft.. Meanwhile ADUs are by definition limited to a smaller size, and making them affordable would be closer in spirit to the original intent of the ordinance.

3. Eliminate new Maximum Net Unit Area limit. Maximum Net Unit Area is a new, unique limitation that only applies to this zone, and nowhere else. It is Floor Area per Unit, and it is often in conflict with the Floor Area Ratio (FAR) for the parcel. There are no MNUA exceptions for existing houses or additions, meaning many of Seattle’s classic bungalows in RSL zones will suddenly become non-conforming, unable to do a ‘bump out’ or even a SECOND story addition. Because basements count toward MNUA, but not FAR, expect a lot of new buildings with basements apartments. 

A basic RSL block reveals surprising inflexibility unless you want to add a second dwelling

A basic RSL block reveals surprising inflexibility unless you want to add a second dwelling

The owners could only do a 230 sq. ft. addition. Not a second story. They could however build a new dwelling behind it up to 2200 sq. ft.

The owners could only do a 230 sq. ft. addition. Not a second story. They could however build a new dwelling behind it up to 2200 sq. ft.

4. Start FAR at 1, give .25 bonus for more dwellings. The FAR is .75, lower than any Low Rise zone, and effectively lower than Single Family zoning (only governed by height and lot coverage). If RSL is meant as a transition between multifamily and single family, it is more restrictive that both.

5. Lower the density ratio to 1 to 1500. Fourteen percent of the newly minted RSL lots will not even support a second dwelling. Why go through this process then wipe the development capacity of 900 lots off the table? Rounding up for density at 1.85 * 2000SF means any lot under 3699SF is still a single family lot, but MNUA effectively limits all dwellings to an FAR as low as of .59.

Slide18.PNG

 

6. Allow more than one Accessory Dwelling Unit (ADU). All these lots are in urban centers, where we are planning to put almost all our growing population. Many lots or owners aren’t going to want to built a full second dwelling. Meanwhile, SFZ will soon allow two ADUs per primary residence. This flexibility will preserve many existing houses, and provide homes for new residents right in the urban villages.

7. Exclude ADUs from MNUA. An accessory dwelling unit counts against the MNUA, meaning many average houses wouldn’t be able to build a cottage without sacrificing square footage in the primary house.

8. Resist the urge to Design Standard. The two Design Standards for RSL are ridiculous. Different color walkways to the house in back? Why? We don’t expect such ham fisted wayfinding in multifamily zones where there’s likely more front doors. One of the great strengths of the proposed code is that it did away with the many of the restrictive types, like ‘tandem housing.’ Let’s not dilute it with well meaning micro management, only to find out that we’ve created a less than graceful solution (remember the platypus!).

9. Allow exceptions from MHA when preserving existing houses. Subdividing existing houses into multiple units will be penalized by the Design Standards, and be subject MHA fee, at the full price for the area of units. The MHA fee calculation is gloss floor area/total units X net increase of units. A 3000 sq ft house, converted into a triplex from single family, would pay MHA on 2000 sq ft as if new, or up to $41,000. That neither incentivizes preservation or the creation of more affordable housing. 

This is a triplex.  Converting it under the MHA regime would cost tens of thousands of dollars in MHA fees in addition to the requirements of retrofitting.

This is a triplex.  Converting it under the MHA regime would cost tens of thousands of dollars in MHA fees in addition to the requirements of retrofitting.

 

10.Take out limit on number of apartments. The stigma of apartment living results in one of the most efficient (and revered) forms being outlawed. The code is clear: RSL outright outlaws more than three apartments regardless of lot size. No cute Capitol Hill fourplexes.

This fourplex is not allowed under the new RSL zone. 

This fourplex is not allowed under the new RSL zone. 

11. Eliminate owner occupancy requirements. We don’t require owners to live on site in other multifamily zones, owner occupancy requirements will severely limit the number of accessory dwelling units and they reinforce a fundamentally class based stigma against renters.

12. Change all residential zones to ‘Residential’. We now have three titles for zones where residences are the only use; Single Family, Lowrise, Residential Small Lot. While RSL is being treated as a unique bridge between SFZ and LRZ, it should be part of a continuum of dwelling per square foot. Streamline!

13. Amend Seattle Residential Code to cover up to four apartments. Building codes switch to the more demanding SBC for anything more dense than a duplex and ADUs are considered as such. When buildings should be getting more efficient, like stacking a third apartment on top of a double decker, there is a quantum leap in construction cost, driven by code compliance.

14. Allow Live Work and Corner stores. In midrise zones, having residential suites at the street level seems forced. Two blocks from the center of an urban village, having an office space legible from the street makes total sense. Allowing corner stores would expand the walkshed so more people will walk to pick something up, rather than drive to a supermarket.

Neighborhood institutions start with entrepreneurial neighbors. Give them a place.

Neighborhood institutions start with entrepreneurial neighbors. Give them a place.

Historic Seattle - 2017 Outstanding Modern Preservation Award

Congratulations to the whole Team and a huge thanks to Historic Seattle for the the recognition of the Robert Reichert House and Studio with the 2017 Outstanding Modern Preservation award last night!

 

Project team:

Clients : Reichert Studio
Heidi and Darin

Contractor: Dboone Construction
Dave Boone Project manager, Luke Marcum Site super

Architect : CAST architecture
Stefan Hampden, principal  & Brian Campbell, associate.

Structural Engineer: TSE Engineering
Keith Ryan PE

Envelope Engineer: RDH building Science inc
Dan Rundle

 

 

Historic Seattle - 2017 Outstanding Modern Preservation Award

Historic Seattle - 2017 Outstanding Modern Preservation Award

historic seattle awards 2017 - team.jpg

Abridged project team at the awards left to right : Luke, Dave, Stefan, Darin, Heidi and Jeffrey 

Historic Seattle Dinner and awards ceremony at Washington Hall.

Historic Seattle Dinner and awards ceremony at Washington Hall.

New stucco facade of the Reichert House & Studio complete with shadow paintings

New stucco facade of the Reichert House & Studio complete with shadow paintings

Interior stairs with view of "door to heaven"

Interior stairs with view of "door to heaven"

Retooled entry of completed project

Retooled entry of completed project