Posts in CAST Projects
CAST designs missing-middle housing in capitol hill
Seattle, missing middle, urban density

Jansen Court missing-middle housing in the Capitol Hill neighborhood of Seattle.

Seattle architect designs missing-middle housing

Jansen Court Apartments is a Built Green 4-Star 10-unit studio apartment building on the back of a 30’ parcel in Capitol Hill, preserving a turn-of-the-century house in the front yard.

With a single stair, this 4-story apartment building was quite the puzzle -- the complexity of regulations are magnified on a small project. Each level is different, with a basement, typical story, vaulted story, and unit with roof access. They're small, 400-600 SF, but nicely livable spaces.

And, it’s in Capitol Hill with a pretty street and bustling neighborhood. Walk Score: 92!

CAST is closely associated with efforts to improve housing affordability through increasing the “missing middle” moderate density infill within existing neighborhoods.

Photo credit: @lensit.studio

early learning education
early learning center, entry

El Centro Roosevelt’s bright and welcoming entry

Feasibility and design in early learning education

Our region is suffering from a significant childcare shortage. The Washington Child Care Collaborative Task Force estimates the total childcare capacity in King County has declined by over 25% since the beginning of the Covid-19 pandemic. This created wide-ranging consequences throughout the economy, delaying the ability of parents to return to full-time employment. As the direct impacts of the pandemic fade, many childcare providers now seek to increase their capacity either through construction of new facilities or expansion of existing ones.

 Early Childhood Education (ECE) is governed by sets of overlapping regulatory requirements. This article aims to provide a brief overview of some of the most important considerations in feasibility and early design phases.

Building-scale Considerations

There are important features inherent to the space itself that cannot be easily added. These requirements must be factored into the cost model for construction, and into a decision for leased space. The following is based on the requirements of the Washington State Building Code (WBC) and the State of Washington Department of Children, Youth, and Families (DCYF) Childcare Licensing Guidelines.

·  Childcare centers are typically a Group-E occupancy; sprinklers are required. Lack of sprinklers is a common red flag in early feasibility analysis.

·  Classrooms for children younger than 30 months must be on the ground floor and must each have an exit door directly to the exterior. Classrooms for children between 30-60 months in age may be no higher than one story above grade and may share common exit pathways. 

·  It is important to verify the proposed space will comply with the requirements of Chapter 5 of the WBC. Group-E occupancies have a smaller allowable area and higher occupancy-separation requirements than other uses in the same type of construction.

ECE Center Considerations

DCYF will license a center for maximum number of children, based on an operating plan that maintains certain ratios of adults to children all times. It is important the design does not unintentionally reduce the allowable number of children or increase the required staff count by misinterpreting DCYF regulations

·  One important example is the minimum area per child. The WBC sets out an Occupancy Load Factor of 35 s.f.; the parallel requirement under DCYF is also 35 s.f. per child. However, DCYF only considers space that is accessible to children at all times. Areas of the room that are considered occupiable under the WBC - such as a teacher’s work desk or a locked cabinet containing art supplies - are excluded from DCYF’s area calculations. 

·  A classroom for 20 children must be designed for at least 22 or 23 persons, since the adult caregivers must also be included in the calculation. For feasibility planning, we have found that if we assume 50 s.f. per child, the final design will comfortably accommodate the planned student count.

·  A minimum of 75 s.f. of outdoor play areas must also be provided, and this area must also include the caregivers. While a single play area can be shared between multiple classrooms, large centers will need to carefully schedule such shared use. Creative alternatives such as walking to a local park may substitute for dedicated outdoor play areas, but these require increased staff levels and are reviewed on a case-by-case basis by DCYF.

·  Current DCYF practices require a large number of plumbing fixtures.
- Separate single-occupant restroom(s) for adult use
- Child toilet rooms with child-height sinks and toilets; with both assisted and semi-private toileting
- Adult-height handwashing sink at building entrance
- Child-height handwashing sinks at each classroom entrance
- Bottle-fillers at each classroom and at outdoor play area
- Adult-height handwashing sink at food distribution area, even if food is prepared elsewhere
- Adult-height handwashing sink at diaper-changing areas within arm’s reach of changing table

·  Kitchen facilities must be carefully considered in the center’s plan for operation. While ECE kitchens are generally not required to be licensed as commercial kitchens, DCYF personnel review them using Department of Health guidelines. 
- Use commercial-type refrigeration with continuous temperature display on the exterior.
- Any on-site food preparation beyond distributing pre-prepared items on disposable plates will require a dedicated kitchen space with separate hand-washing, food preparation, and three-compartment dishwashing sinks.
- Some types of hot food preparation can be accommodated with residential-grade cooking and ventilation equipment, this will significantly limit potential menus. Any operations utilizing grilling or frying will require installation of a full Type-II commercial range hood. This can be impossible in a space not designed for it from the ground-up.

early learning, classroom

El Centro de la Raza’s new Early Learning Center at Cedar Crossing classroom

Classroom-level Considerations

Good design can help reinforce the mission of the center. This covers a lot of potential ground, but here are a few areas where we often focus attention:

Clarity of wayfinding is critical for young children and is often a challenge within an irregular tenant space. If the layout must be complex, color, lighting, and material changes can give each group of classrooms its own identity. Larger gathering nodes outside classrooms can accommodate busy student dropoff and pickup.

Many designers associate ECE with bright primary colors; keep in mind, that classrooms will be filled with a huge variety of educational materials and children’s projects in a rainbow of shades. Letting the architecture create a clean, muted backdrop helps organize the inevitable chaos.

Understand the routines of a child's day and let those guide your design. Snacks and meals will be served and eaten in a certain way. If the classroom doesn't have a designated place for folding or stacking mattresses, they will take up a corner of the room that is not available for playtime. If a cozy space for reading or quiet play isn't inherent in the geometry of the room, create one with casework, furniture, or a change in lighting or ceiling height.

Many different elements must be balanced to achieve a successful ELC design. Details aside, the most important element is to really get to know your client and their operation. It is hard to go wrong by listening carefully to the teachers who spend all day in the classroom.


Forrest Murphy, LEED AP BD+C, Principal at CAST architecture
Forrest has spent much of his career helping non-profit and institutional clients balance programmatic and strategic goals with technical and budgetary realities.

First published in the Daily Journal of Commerce’s Special Section on Education, September 2022.

Photos by: Cheryl McIntosh at Quanta Collectiv

A Lakeshore home maximizes its site and views
lakefront home, lake views, living room

SEATTLE architect MAXIMIZES lakefront SITE

This full renovation adds space to support dynamic family life—places to work, play, entertain, and exercise. Programmatic additions include a second-floor music room and a third-floor family/media area opening up through a ghost door to expansive views, a kitchenette, a small gym, an office, and a pocket art studio. A bright, double-volume wall of glass in the staircase seamlessly connects floors and is topped with a skylight.

The kitchen’s neutral palette includes soft-close, white oak cabinets with custom panel details, honed quartz countertops, and a solid surface backsplash. A landing on the second floor offers a special moment to enjoy the green roof, with abundant daylight from glazing and a skylight, before entering the music room.  Glazing and outdoor living spaces allow the architecture to feature the views of Lake Washington.

Interior Design: Hyde Evans Design
Built: Align Builds
Photos by: Andrew Giammarco

See more here.

interior living room, art nook, lake views
lakefront home, lake views, living room, dining room kitchen lounge
What are some of the main benefits of living in a tiny home?
ADU, DADU, backyard cottage, interior

Seattle architect talks about the BENEFITS OF LIVING IN A TINY HOME

CAST is featured in ISN’s article: Tiny Home vs. Traditional Home: What You Need to Know

Tiny homes and small space living offer a bevy of rewards to those who decide they don’t need many things and are ready to streamline their life. There are many reasons to choose small space living. Some people may want a house that moves with them, to not have a mortgage, or simply to live lightly. 

Lower Energy Usage

Tiny homes consume less energy and cost less to maintain. Smaller appliances are typically more efficient. One will use less energy, and water, and create less waste. A tiny home could potentially be heated with a wood stove and powered by a solar array. 

It Costs Less 

Tiny homes cost a fraction of the price of traditional homes. The cost to own or rent will be significantly less and they cost less to maintain. Since small spaces use less energy, there will be less outlay on all bills related to the home. Reducing housing expenses may let owners/tenants save money for (or in) retirement, travel, or allow them to decide to work less.

Streamlined Maintenance

A tiny home is easier to maintain. With fewer appliances to repair, less exterior area to maintain and even less space to clean, those who live in small spaces may have more time to spend on work, fun hobbies, and their relationships.

Mobility

Tiny Homes can be made to be mobile. Whether it’s a vacation or a new permanent spot, a tiny home can be built to travel.

Minimalist lifestyle

De-clutter. There is only room for the important things and those things that matter most. Plus, there is also the opportunity for more focus and less distraction. A tiny home can be constructed from recycled, repurposed, and salvaged items.

Eco-friendly living lifestyle

By using less energy tiny homeowners reduce their carbon footprint. There is only room for vital appliances, so you save on electricity bills. Also, there is the potential for minimal expense on a rainwater collection system and composting toilet. The tiny home can be designed to be completely off-grid.

Photos by: Cindy Apple Photography

Seattle DADU, ADU, exterior


Can I be more sustainable by living in a tiny home?
Seattle DADU, kitchen, backyard cottage, interior

A Seattle Detached Accessory Dwelling Unit

Sustainable living in a tiny home

CAST is featured in Porch’s round-up: Everything About Tiny Living: Tips From the Experts

We are rethinking space and home. CAST believes tiny homes, accessory dwelling units (ADUs), and backyard cottages are inherently sustainable building options, as well as sensible answers to the housing crisis. Tiny homes require fewer materials to build, create less waste, and use less energy to power, heat, and cool when compared to traditional single-family houses. 

In addition, people who live in tiny houses will own fewer possessions and spend less overall. Downsizing will influence lifestyle in many ways—streamlining possessions, becoming more mobile, and building financial security—which leads to a lower carbon footprint. Typically, as one moves into a tiny home, other segments of life change positively as well including overall consumption of goods, services, and even food. And this, in turn, reduces the impact on the environment. Specifically, with carbon footprint in mind, the factor that will have the most impact is the size of the home.

Good design matters. Our backyard cottages are designed to be energy efficient, low cost, and built for privacy within their context. Daylighting is important in every home and especially in small spaces. Effective storage is essential. Layering and overlapping are key to designing successful small spaces while using different materials will create well-defined areas. Plan to maximize every square foot in common living areas and integrate outdoor space. Covering outdoor space makes it feel like an extension of the home, without having to heat or cool it.

Density and more efficient land use are critical to addressing our housing crisis, climate change, and persistent inequities in access to housing. Modest infill houses like tiny homes, ADUs, and backyard cottages are a key strategy to empower citizens to provide new housing, build generational wealth, and leverage taxpayers’ investment in infrastructure, transit, schools, and parks. Plus, these homes could create an affordable housing inventory.

Photo, above: Cindy Apple Photography
Photo, below: Benjamin Drummond Photography

sustainable tiny home,  Methow Valley

A functional and sustainable tiny home in Washington’s Methow Valley

See more of this tiny home on our website.

How architects are advocating for ADUs in high-cost urban areas

Co-founder of CAST, Matt Hutchins, AIA, CPHD, recently spoke about the ADU (Accessory Dwelling Unit) Opportunity at the AIA Conference in Chicago and how architects advocate for ADUs. We’ve included a block quote of the article below, see the full article here. Thanks to the AIA and author Katherine Flynn.

ADUs are one piece of America’s “missing middle” housing puzzle.
By Katherine Flynn

In the United States, home prices rose nearly 20% last year, reaching record levels. In light of a lack of supply, neighborhoods zoned for single-family housing are being re-examined by urban planners – and architects – looking for creative ways to address density.

Seattle ADU, DADU, backyard cottage

HOW ARCHITECTS ARE ADVOCATING FOR ADUS

In Seattle, where the cost of living is 53% higher than the national average, the pinch is particularly severe. Local architects and city officials hope that ADUs – or accessory dwelling units – could provide some relief.

On Day 2 of AIA’s Conference on Architecture 2022, a group of five panelists from Seattle discussed how architects can advocate for increased ADU production and make the process easier. Code reform, public outreach, financial incentives, and online tools all play a role.  

As Nick Welch of the Seattle Office of Planning and Community Development pointed out, Seattle—like many American cities—has a long history of redlining and use of racial covenants in residential neighborhoods. Today, high housing costs are driving displacement and reinforcing exclusion, with historically disenfranchised people being hit particularly hard.

“Much of the city is shielded from growth, and that’s very much by design,” Welch said of policies enacted by the city in the twentieth century. In the 1990s, the city adopted a growth strategy that concentrated more than 80% of new housing in about 30 designated areas called “urban villages” – largely studio and one-bedroom apartments.

“[Urban villages] helped us accommodate a lot of new growth, but it still hasn’t kept up with demand,” he said. “Single-family areas actually have lost population in recent decades, even as our overall population has soared. That means people are priced out of the expensive housing in those areas, and they look to lower-cost neighborhoods where they often will compete with lower-income BIPOC households that have lived in those areas for a long time.”

Welch acknowledged that ADUs are just one part of Seattle’s housing strategy overall, but the city pursued it because it adds lower-cost rental housing in areas that don’t have very much of it. It also provides options for families to age in place or receive passive rental income.

Currently, less than 4% of Seattle single-family lots have an ADU. To incentivize increased production, Seattle’s planning department had to rethink barriers that prevented homeowners from building an ADU, including land use codes and limited tools for financing them.

Despite several years of setbacks, including an appeal by neighborhood groups who were worried about negative impacts of increased density, code changes were adopted in 2019. They allowed for up to two ADUs on single-family lots, as well as two stories in a single ADU. The code changes also eliminated a previous parking requirement and expedited the permitting process.

To help homeowners navigate the potentially onerous process of building an ADU, the City of Seattle launched an online resource called ADUniverse. AIA Seattle was involved in shaping the guidance, as well as with pre-approval of 10 ADU designs. In the two years since the code changes were implemented, almost three times as many ADUs have been permitted. The pandemic, Welch says, may have also spurred more interest in ADUs as an option.

Matt Hutchins, AIA, of CAST Architecture, has been designing ADUs for the past 12 years.

“As architects, especially, we have the ability to capture what the future could be,” he said. “We have to make room for more people, more housing, and it’s really a matter of how we do that. We can be super effective messengers about how to tackle some of these problems.”

During his advocacy work for the code changes in Seattle, Hutchins became co-founder of a group called MOAR, or More Options for Accessory Residences.

“What we knew, and what we found out even more strongly, is that grassroots support for housing exists,” he said, emphasizing the importance of centering the narrative on positive aspects of ADUs. He and his fellow advocates also worked on building a coalition with other stakeholder organizations like AARP and construction groups. “Having this dialogue in our community was really important,” he said. An online gallery of completed ADUs helped “build a market, inform the public, and diffuse some of the criticism.”

“As architects, we have the responsibility and the skills to show how we make room for new housing, and how we create the kind of city that we want to live in,” he said.  

CAST is closely associated with efforts to improve housing affordability through increasing the “missing middle,” moderate density infill within existing neighborhoods. This work includes policy advocacy work as well as the design of DADU’s, ADU’s and small-scale apartment buildings

this Mercer Island Home Brings in the outdoors
interior, living room, kitchen, dining room

this mercer island custom home brings in the outdoors

With neighbors close by, this home on Mercer Island is organized into two solid masses flanking a glass box that acts as the gathering area. An open staircase ties the levels together and a bridge links bedrooms upstairs and allows for a vantage point to the living room below and the backyard tree canopy. With glass doors and large stacked windows, the main gathering area is linked to the outdoor patio and beyond to the forested green space. The exterior materials are accentuated by wrapping into interior spaces. The dining room, kitchen, and large walk-in pantry offer intimate spaces, with a strong connection to the two-story living space. The pantry, with plentiful storage, can be closed off from the open kitchen and casual eating area.

See more in the Homes section of our website.

Photos by: Andrew Giammarco

URBAN DENSITY In Seattle’s Montlake neighborhood
Seattle ADU, DADU, missing middle housing

A modern Tudor-style cottage built to fit the neighborhood and add density to Montlake

DADUs help seattle’s density

This well-crafted modern Tudor-style cottage in Seattle’s treasured Montlake neighborhood brings forward a model of urban density, while providing a private home. A gracious entry brings you to the great room with vaulted ceilings, dark-wood beams, and loads of natural light from all four sides of the home. The kitchen is designed with abundant easy-to-use storage and generous counter space. The dining area’s large glass doors open to a patio facing inward to the property’s shared courtyard that connects the private homes and provides opportunities to gather. A lot of home fits into the 1,225 square feet with three bedrooms, two baths, flexible utility space, and creative storage. Two entrances make access to both levels of the home straightforward.

See Built Green’s case study on their website: CAST architecture Modern Tudor DADU It highlights energy efficiency, low-impact development, rainwater catchment, indoor air quality, moisture protection, and materials with reduced environmental impact throughout the home and property.

See more: Blaine Cottage

Photos by: Andrew Giammarco

A pair of CABINs-on-wheels clad in shou sugi ban charred-wood are modern and ultra-functional
tiny homes, shou sugi ban, methow valley

Modern, functional shou sugi ban clad tiny homes on wheels in the methow valley

Like some who found themselves in lockdown at the start of the Covid-19 pandemic, this Seattle family of four realized if they were going to work and attend school online, they could do it from anywhere. Cue a temporary move to their summer place. A year into their stay, they decided they were putting down roots in the Methow Valley and decided to make the change permanent. Their out-of-the-box solution? The family spent the summer building a pair of tiny homes on trailers with the help of friends and local tradespeople.

CAST’s goal was simple: apply everything we’ve learned about efficient home planning to a design that would be buildable by non-professionals and legal to tow down the highway. This was a highly collaborative process as we sought a compromise between homeowner research into solutions pioneered by the DIY tiny-house community and our knowledge of modern construction best practices.

The result is a pair of elegant, flexible rooms-on-wheels clad in shou sugi ban charred-wood that are modern, warm, and ultra-functional.
Shou sugi ban is a Japanese preservation technique that burns wood to create a weather-proof finish. The charred outer of each tiny home is cypress harvested in Japan, milled, burned in a kiln, and sealed with oil. Over time, they will weather and gain a patina.

The simple pitched roof is matched by an outward tilting wall to create a playful form with extra headroom at one end for a sleeping loft (with a built-in desk below). The regular rhythm of high square windows makes the room feel much larger by illuminating the ceiling. At the entry side, floor-to-ceiling glass frames a wood stove, creating a cozy lounge space. Inside, a narrow service bar in the center will accommodate a small kitchen and a private compartment for a composting toilet.

Featured on Dwell+ ”A Family of Four Joins Hands to Build Two Tiny Homes in Washington”
More photos at: https://www.castarchitecture.com/mccarthyrekart-tiny-homes
Photos by: Benjamin Drummond Photography

Complex Sites

Central to the name, identification and restoration of wetland habitat was central to the Rainier Beach Urban Farm & Wetlands. The location of all site improvements, including agricultural fields, buildings, roads, parking, and other farm infrastructure, was dictated by the need to not only avoid riparian zones, but to facilitate their enhancement. Rather than treating this as a limitation, our team of Landscape Architects, Architects, and Civil and Environmental Engineers used the wetlands at the center of the site as an organizing principle that strengthened the project.

urban farm, waterfront, seattle, classroom building

Rainier Beach Urban Farm and Wetland

complex sites

Finding the right place to build the Icicle Creek Retreat within a 22-acre private inholding in the Wenatchee National Forest required a careful and deliberate process. CAST worked closely with a wetland biologist and a geotechnical engineer to identify a buildable site, triangulating between several types of stream and wetland buffers, geological hazard areas, location of access roads, and forest fire safety concerns. The project required both SEPA review and Conditional Use Permit approval through the Chelan County Hearings Examiner.

forest, cabin, exterior, views

Icicle Creek Retreat in the Wenatchee Forest, Washington

The Port Gamble S’Klallam Tribe Hatchery Building is located on the beach in a known archaeological site. CAST worked closely with the Tribe’s Cultural Resources team to develop an amendment to the Tribe’s Archaeological Resources Protection Act (ARPA) permit and to incorporate the resultant Monitoring and Discovery Plan (MDP) into the project specifications. Located in the intertidal zone, the design required close coordination with Structural and Geo-Technical engineers to ensure that the building will be resistant to higher tide levels predicted to occur with rising sea levels.

rendering of beach shelter, pacific northwest design

Rendering of Port Gamble S’Klallam Tribe Beach Shelter and Hatchery Building in the distance